Как установить масло в крышке для сквозного отверстия под плунжер

Возможно, вы задаетесь вопросом, как разработать масло для сквозных отверстий. Хорошая новость заключается в том, что существует несколько способов сделать это. Есть несколько важных факторов, которые необходимо принять во внимание. К ним относятся конструкция пробки, тип масла, которое вы используете, и тип прохода, который вам нужен.

Through-hole plug oil

The first step in setting up a through-hole plug is to drain the old oil from the system. To do this, remove the stock plug or filler cap. This will speed up the process. Be careful when draining the oil, however, because it may be hot.

The next step in setting up a through-hole plug oil is to send a new pad design to the factory. It is important to check that the hole in the pad is useful for the via as well. If not, then you will have to use green oil. It is important to remember that green oil covers the hole, but will not prevent welding.

Via cover oil

Via cover oil fills the hole in the via and protects it from short circuits. It is also known as via plug oil. This type of via plugging oil is opaque and covers the entire hole. Unlike the through-hole plug oil, however, it does not accept false copper or orifice ink.

Via cover oil is created by converting a pad or protel file. It is then applied over a conductive hole. It is essential to close the via property setting window after applying this oil. The via cover oil is a necessary part of the soldering process. It can be used in both single and multiple-conductor circuits.

Via cover oil is used to cover conductive holes and pad holes in a conductive assembly. To apply the solder mask layer, simply select the via attribute and click “tenting.” Alternatively, you can use the solder mask layer to apply solder to pads and vias.

Designing a via cover oil

When designing a via, there are a few things to consider. First, it’s important to cover the via with oil. Fortunately, the via attribute on the Protel software allows you to do this. There are also tenting options for vias that you can use. These tents can be used to cover oil that flows through a via’s open window. You can also use a pad to press the oil into the via’s opening window.

In some instances, a via cover oil is necessary for plug-in holes. Otherwise, the plug-in hole will be covered in green oil and will not be usable. As such, you should always make sure to coat the hole with tin before applying the via cover oil. It’s also important to use the correct pad designs for a via.

A via cover oil covers the solder ring on a via and prevents short circuits while the component is in use. It is also important to consider via plugging. This type of via cover oil plugs the hole in the via, preventing any oil from flowing through. A good standard for via plugging is an opaque color. If you’re not comfortable working with opaque ink, you can use a non-opaque via plug oil.

By following these steps, you can make a gerber file that shows the design of your via cover oil. You can then send this file to a manufacturing company for manufacturing. Make sure you understand the requirements and gerber file before you order the part.