PCB 인쇄에 사용되는 용지 선택

When choosing the type of paper to use for PCB printing, there are a few different options. Some options are thermal transfer paper, while others are toner transfer paper and photo paper. Depending on the purpose of your PCB printing, you may want to choose one or the other.

Thermal transfer paper

Thermal transfer paper is a special type of paper that is used for printing PCBs. The paper is heated between 150-180 degrees Celsius and then a circuit board’s circuit diagram is printed onto it. After the transfer paper is printed, Bonded Copper is etched with an Ammonium persulphate solution and cleaned with alcohol.

Thermal transfer paper can be used for single and double sided PCB printing. During the printing process, a laser printer prints a circuit board circuit diagram on the shiny side of the thermal transfer paper. The paper is then heated to between 150 and 180 degrees Celsius. This heats the paper, which deposits it on Bonded Copper. The Bonded Copper can then be removed using an iron or gasoline.

The thermal transfer method can be used with laser printers, but it can not be used with inkjet printers. Once the thermal transfer paper has been printed, it is transferred to the copper board by using a fast plate-making machine, iron or laminator. This method produces good graphics and board images.

Toner transfer paper

PCB printing typically requires a toner transfer paper. This paper is usually brown in color. This type of paper is used in the initial prototyping stage and has a fast turnaround time. It has a similar printing process to that of laser printers. However, it is not reproducible. You may need to experiment with the technique to find the right one for your needs.

Before a PCB printing project, it is necessary to prep the board. This will make the toner adhere to it better. Some people wipe copper with ferric chloride to give it a “rusted” appearance, while others dip the board into the solution to create a rough surface for the toner to stick to. In any case, it is important that the copper be cleaned and dry properly before using toner transfer paper. Otherwise, the toner will not stick to the copper.

Once you’ve prepared the board and gotten the toner transfer paper ready, you should carefully cut a piece of paper slightly larger than needed for your design. Next, place the printed side over the raw board and secure it with an adhesive paper. Make sure that you do not reposition the PCB while the paper is drying.

PCB printing can be done by using a laser printer or a toner transfer paper. These printers produce high-quality prints and will be able to print on various materials, including wood. PCB printing requires a high-quality printer with a high-speed print setting. The best way to get an accurate print is to use a laser printer. In some cases, you may be able to use a standard HP printer, which is a good choice for PCB printing.

Photo paper

PCB printing can be accomplished by using photo paper. This photo paper is coated with a special ink and is used to produce high-quality printed circuit boards. You can also use the paper to print images. The first step is to set the printer’s quality to either high or normal, and then select the desired speed. After the settings are set, you must wait for the printed circuit board to cool completely before sticking it to the copper board. While this may seem like an elaborate process, there are actually some simple tips and tricks you can use to make your own PCB printing.

Acetate paper is a great choice for PCB printing. This type of paper allows for more light to pass through than other materials. It is also difficult to print on with inkjet printers. Another option for PCB layout is parchment paper. This type of paper is ideal for photo exposure, and allows more light to pass through.

When printing on photo paper, make sure that it is not too glossy. If you are worried about causing damage to the board, choose plain paper. Photo paper is also good for printing circuit boards. It has a smooth surface and won’t clog the board’s holes.