4 Tips Pemeriksaan Papan PCB

PCB board inspection is a process that involves various tests to find defects. This process involves checking the board for roughness, warpage, and dimensioning. It also involves inspecting the board’s surface quality for defects such as pits, scratches, and voids. In addition, it requires thorough inspection of electrical connectors, vias, and pad plating for defects.

Automated optical inspection (AOI)

AOI is an excellent tool for evaluating the quality of a PCB board. This process can help detect defects in a PCB before they lead to other problems. AOI uses an image processing system to recognize defects. It can also gauge the package’s dimensions. It consists of several parts, including an actuating system, an illumination system, and a CCD image system.

AOI can be used at any stage in the fabrication process, including during reflow soldering, a critical stage of the production process. It is ideal for high volume production because it is capable of detecting multiple defects. However, it is not recommended for low-volume production or development runs. Moreover, it requires considerable investment and time to set up. AOI can help you reduce costs while increasing efficiency by modifying manufacturing parameters.

AOI is very useful for detecting solder bridges. It also detects excess solder on pads. This is a problem that can be missed by human inspectors, especially if they have to examine dozens of boards of similar design. AOI can detect these defects and send the board for rework if necessary.

Electrical tests

Electrical tests for pcb board inspection involve testing a circuit board’s traces. These tests can help determine if there are any faults or design issues. They can also help determine if a circuit board has sufficient isolation between components. There are various types of tests available, each focusing on a different area of the board.

Electrical tests are often used to confirm that a circuit board is free from shorts and other problems. This is usually done by pushing a board against a bed of probes. The testing process is time-consuming and requires expensive tooling. There are several different types of circuit board inspection machines, and each has its own pros and cons.

A second type of test involves analyzing the board’s structure. This is also called cross-section analysis. This is a destructive procedure, but it reveals critical design defects. This type of test is often required for complex and high-volume PCB production.

X-rays

PCB board inspection with X-rays can be a highly accurate process. The high-penetration power of x-rays results in high-quality images that reveal differences in density and thickness of PCBs. This data can be used to determine the quality of a joint or to diagnose a fault in a design. This technology is used in many industrial processes, from the initial manufacturing stage to final testing.

By looking through a PCB board with X-rays, inspectors can detect problems that are hidden in the board’s surface. In addition to identifying voids, bridges, and other ‘hidden’ connections, X-rays can detect buried or blind vias, as well as excessive or insufficient solder paste. X-rays are also useful for inspecting ‘Ball grid array’ surface-mount packaging, a common type of PCB board. In this type of PCB, there are more connections on the board than on standard PCBs, and it’s harder to examine them with visual inspection alone.

PCB X-ray inspection can provide high-quality measurements and help manufacturers ensure the quality of their PCBs. X-rays are ideal for two or multi-layer boards because they can test the inside of the sample. They can also detect defects that other methods can’t detect, and a high test range allows for more accurate results. X-rays can also provide measurement information, which can be used to evaluate the production process.

Tomography

PCBs can be inspected using X-ray technology. This advanced technique uses a special fixture to hold the PCB in place as it is exposed to x-rays. The fixture helps engineers view the subject from different angles. The detector measures the amount of attenuation at each projection, which is then used to reconstruct the object. PCBs are made of a variety of materials, and some materials absorb more X-rays than others.

Using tomography to examine PCB boards has several advantages. It can accurately identify any missing or incorrectly positioned pins or connectors. It is also able to detect any internal defects in IC chips. Furthermore, it can measure the soldering quality of ball grid arrays.

PCBs can also contain invisible defects. X-ray images can identify missing or cracked solder joints. The images collected by these machines are highly detailed and allow inspectors to analyze various aspects of the defect. A void in a board’s solder joints will reduce the heat conductivity of a solder joint and decrease reliability.