Výrobní postup tuhých desek plošných spojů Flex a jejich výhody a nevýhody

The production flow of flex rigid PCB is very complex compared to traditional rigid PCBs, and it has many challenges. In particular, the bend lines in the flex circuits make the routing difficult, and the components placed on these bend lines are subjected to mechanical stress. To mitigate this, through hole plaiting is often used, or additional coverlay may be added to anchor the pads.

Blind vias

Flex rigid PCBs are often used in medical equipment, imaging equipment, handheld monitors, and military equipment. They have a low cost per unit, are flexible, and can withstand fluctuations in temperature. These boards are also used in radio communication systems and radar equipment. They are also used in noise and vibration testing systems.

The production flow of rigid flex PCB begins with the design and layout of the board. The layout must be checked for electrical continuity. The flex area must be designed to withstand bends without weak spots or flexing. During this process, traces are routed perpendicular to the bend line. If possible, dummy traces should be added to strengthen the bend area.

High temperatures

Rigid-flex PCBs are made by adhering a PCB with an adhesive tape to a flex board. These adhesive tapes are made of high-temperature materials. These materials can withstand high temperatures and withstand adverse effects from radiation, Raman scattering, and infrared rays.

Rigid-flex PCBs typically use a combination of PI and PET films for their substrates. Glass-fibre cores are also common, though they are typically thicker.

Chemicals

Rigid flex PCBs have a variety of applications and are important components of everything from tiny consumer electronics to sophisticated military/defense systems. They are extremely versatile and are ideal for applications where high temperatures and constant movement are present. In addition to being very flexible, these boards are also chemical and solvent resistant.

Copper is used as the most common conductor material and is widely available. It also has good electrical properties and workability. Copper foils are available in rolled and electro-deposited forms. Copper foils are often subjected to surface treatment to improve adhesion and protect them from oxidation.

Vibrations

The production process of rigid flex PCB is lengthy and requires more materials and manpower than rigid PCB. This type of circuit board is typically used in medical devices, wireless controllers, and drug delivery systems. It is also used in the aerospace industry for motion and sensing systems, radio communication systems, and environmental test chambers.

This type of PCB is more reliable than traditional rigid boards. It can withstand high vibration environments and fold into small profiles. Moreover, it is easier to install in tight spaces, which makes it ideal for high-density applications.

Shocks

This type of circuit board is more complex than traditional rigid PCBs, presenting a variety of design challenges. For instance, bend lines in flex circuits can affect routing, and components placed on them can result in mechanical stress. Fortunately, through hole plaiting and additional coverlay can help mitigate this problem.

Another benefit of rigid flex PCBs is that they are compatible with existing devices. They can be bent and folded without causing damage to the circuit. Furthermore, they are reliable. This type of circuit board is a great choice for high-reliability applications.

Náklady

Náklady na pevnou flex desku plošných spojů závisí na několika faktorech, například na typu použité flex desky a počtu vrstev, ze kterých se skládá. Náklady závisí také na vývojáři a výrobci desky. Někteří výrobci desek plošných spojů si účtují extrémně vysoké ceny, které jsou však ospravedlněny výjimečnou kvalitou a důrazem na detail, který poskytují.

Flex PCB jsou stále složitější, protože musí splňovat přísnější požadavky. Například směrnice REACH, požadavky na EMC a nové normy vyžadují specializované testování použitých součástek. Dodatečné náklady spojené s těmito testy přímo ovlivňují cenu flexibilních desek plošných spojů.