Der Unterschied und die Rolle von Lötstoppmaske und Pastenmaske auf PCBs

Printed circuit board (PCB)

The thickness of the solder mask and paste mask on PCBs is an important factor in determining the electrical properties of a circuit board. It can also determine the safety and feasibility of PCB assembly. The recommended thickness ranges from 8 to 15um.

The Cadence Allegro PCB Editor allows you to control the paste mask and solder mask layer configuration. It also allows you to define the width and materials of each layer. This helps you plan layer stackup for manufacturing. The tool also includes an E-Book with information on layer stackup strategies.

The solder mask color range is wide. In addition to green, solder masks are also available in blue and white colors. Some designers prefer to use different colored solder masks to make their boards more identifiable or to differentiate prototypes from finished products. However, the use of solder mask can cause a wide variety of problems in PCB manufacturing. If not used properly, it can lead to poorer quality boards and reduced lifespan.

The solder paste mask must be applied evenly. The thickness of the paste mask should be within a tolerance range of 0.2 to 4 mils. This rule is important to ensure that the solder paste is applied evenly and completely. Clearance between the solder paste and the copper wires is also important. This rule is available in popular CAD software and is a vital rule to ensuring quality PCB solder mask production.

The solder resist or paste mask is a thin layer of material on the surface of the PCB that prevents solder from leaking onto the copper traces. The mask also prevents oxidation from damaging the PCB. Further, it prevents corrosion by preventing damage due to exposure to chemicals.

Critical applications require the highest level of performance. These boards should be designed to ensure that the service does not have any interruption. These are usually high-performance commercial or industrial products. However, it is not necessary for them to be life-critical. For example, if the equipment needs to function continuously, it is necessary to ensure the PCB paste masks are both reusable.

The solder mask can be applied either with a squeegee or through a vacuum-lamination process. For large-scale production runs, stencils can be used. The stencils are typically laser-fabricated with the same data as the paste mask. In addition, stencils are treated with a variety of materials to ensure high precision and durability.

PCB paste masks and solder masks are essentially a part of the printed circuit board itself. The paste mask is a stencil layer that is smaller than the actual PCB pads. The solder paste mask has a corresponding hole in the mask that corresponds to the solder joints.

Solder masks are made by a variety of processes. Solder masks can be applied as a dry film or as a thin, opaque film. The application process for both masks is similar, but each method uses a different method to make the finished product. The first method, called LPSM, uses a photo film to expose the solder mask. This process allows the film to cure and to remove any air bubbles.